How To

BRIDGEWORKS HOW TO VIDEO GUIDES

WANROCKIT

• Set up WANrockIT iSCSI Nodes
• Control a remote WANrockIT Node
• Link together WANrockIT Node

FIBRE CHANNEL

• Configure the fibre channel ports
• Map the fibre channel target ports

NETWORKING

• Use LanScan to locate the Bridge or Nodes IP address
• Set DHCP on your Bridge or Node
• Set a static IP address on your Bridge or Node
• Connect to the web interface

SCSI

• Use the SCSI initiator
• Use the SCSI target

ISCSI

• Logon to an iSCSI target from a Bridge or Node
• Enable CHAP and login to your Bridge or Node with Microsoft iSCSI initiator
• Login to your Bridge or Node with Microsoft iSCSI initiator (without CHAP)

MAINTENANCE

• Update the firmware of your Bridge or Node

SECURITY

• Change the login password of your Bridge or Node
• Enable HTTPS

LOGS

• Download and clear the logs of your Bridge or Node

CONFIGURATION

• Backup your configuration
• Restore a saved configuration
• Restore factory defaults

SET UP WANROCKIT ISCSI NODES

CONTROL A REMOTE WANROCKIT NODE

LINK TOGETHER ANROCKIT NODE

CONFIGURE THE FIBRE CHANNEL PORTS

MAP THE FIBRE CHANNEL TARGET PORTS

USE LANSCAN TO LOCATE THE BRIDGE OR NODES IP ADDRESS

SET DHCP ON YOUR BRIDGE OR NODE

SET A STATIC IP ADDRESS ON YOUR BRIDGE OR NODE

CONNECT TO THE WEB INTERFACE

USE THE SCSI INITIATOR

USE THE SCSI TARGET

LOGON TO AN ISCSI TARGET FROM A BRIDGE OR NODE

ENABLE CHAP AND LOGIN TO YOUR BRIDGE OR NODE WITH MICROSOFT ISCSI INITIATOR

LOGIN TO YOUR BRIDGE OR NODE WITH MICROSOFT ISCSI INITIATOR (WITHOUT CHAP)

UPDATE THE FIRMWARE OF YOUR BRIDGE OR NODE

CHANGE THE LOGIN PASSWORD OF YOUR BRIDGE OR NODE

ENABLE HTTPS

DOWNLOAD AND CLEAR THE LOGS OF YOUR BRIDGE OR NODE

BACKUP YOUR CONFIGURATION

RESTORE A SAVED CONFIGURATION

RESTORE FACTORY DEFAULTS